Electro-Voice TX1152FM 12-Inch Two-Way Full-Range Floor Monitor

Electro-Voice TX1152FM 12-Inch Two-Way Full-Range Floor Monitor

The Electro-Voice TX1152FM 12-Inch Two-Way Full-Range Floor Monitor is a compact, high output dedicated floor monitor for use on small to medium-sized stages where high quality vo­cal and instrument applications are required in a lightweight package.The TX1152FM enclosure utilizes Signal Synchronized Transducers™ (patent pending), a design that aligns the woofer and compression driver by locating them on separate baffles, and integrates a low distortion port between the baffles. This offers tremendous advantages over traditional flat baffle construction: the acoustic centers of the woofer and compres­sion driver are closer together, synchronizing arrival time; the voice coils of the compression driver and woofer are in the same plane, achieving linear phase response; and the size of both baffles are smaller than a single baffle; resulting in a smaller footprint. The TX1152FM utilizes the DH3, a high output 1.25” titanium compression driver, coupled to a Constant Directivity™ 90° x 50° horn. The SMX2151 15” woofer has an FEA optimized magnet structure and shorting ring for ultra low distortion. The crossover uses steep 24 dB/octave slopes with equalization for very smooth response in vocal range, and has a built in protection circuit for long term reliability. The combination of the trans­ducers, enclosure, and crossover result in a compact floor monitor that is capable of very high output levels levels before feedback. The TX1152FM has a variety of features that make It'suited as a dedi­cated floor monitor. The internally braced enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoatfor maximum strength and durability. The unique grille design is very strong and dent resistant, and features a rotatable logo. Four way handles allow for gripping the TX1152FM in a variety of positions. The recessed input panel with dual NL4 connectors is located on the rear of the enclosure, which keeps the connectors hidden and away from the performers on stage.

Key Features

• 55° Vertical Floor Monitor with Signal Synchronized Transducers
• 100 dB Sensitivity, 133 dB Maximum SPL
• DH3 1.25” (32mm) Diaphragm, 1” (25mm) Exit Pure Titanium Compression Driver
• SMX2151 15” (381mm) LF Transducer with Fully Symmetric Drive
• Integrated Crossover with Steep 24 dB/ Octave Slopes and HF Protection
• 90° x 50° Coverage Pattern
• 500W Continuous (2000W Peak) Power Handling

Technical Specs

Frequency Response (-3 dB)

65 Hz – 20 kHz

Frequency Range

45 Hz – 20 kHz

Rec. Hipass Frequency

45 Hz

Axial Sensitivity

100 dB (1W/1m)

Max. Calculated SPL

133 dB

Horizontal Coverage

90 degrees

Vertical Coverage

50 degrees

Power Handling

500 W Continuous, 2000 W Peak

LF Transducer

SMX2151, 15 in. (381mm) Driver

HF Transducer

DH3, 1.25 in (32mm) Diaphragm Compression Driver

Crossover Frequency

1750 Hz

Nominal Impedance

8Ohms

Minimum Impedance

6.2Ohms

Connectors

Neutrik Speakon NL4's

Enclosure Material

Plywood and MDF with EVCoat

Grille

16 GA Steel, Black Powdercoat, with Rotatable Logo

Dimensions (H x W x D)

18.7” x 17.3” x 25.8” (475mm x 439mm x 655mm)

Net Weight

51.9 lbs (23.5 kg)