Japanese Dogyu Ryoguchi Genno Hammer

Made in Japan

• The flat face is used for driving nails & tapping chisels, while the slightly curved face is used as a nail set hammer, making sure the nails are flush with the wood
  
• Wood handle is made of Japanese White Oak 

• Product Description
• Specs

• 
  

  This Japanese Dogyu Ryoguchi Genno Hammer has a unique design with one flat striking face & another slightly curved face. The flat face is used for driving nails & tapping chisels while the slightly curved face is used as a nail set hammer, making sure the nails are flush with the wood without damaging the surrounding area around the nail. The convex curved side of the hammer can also be used when working in joinery pieces. When hammering & tapping joints, the hammered area will be temporary diminished, but will later contract back for a tight joint. A very special and unique Japanese carpenter hammer.  Made by Dogyu.

• Product	Hammer Face Size	Head Length	Overall Length	Weight	Model #
  Japanese Dogyu Ryoguchi Genno Hammer ~ 8 oz	-"	-"	-"	225 g  /  8 oz	009871
  Japanese Dogyu Ryoguchi Genno Hammer ~ 12 oz	-"	-"	-"	350 g  / 12 oz	003091
  Japanese Dogyu Ryoguchi Genno Hammer ~ 15 oz	1-1/4" x 1-1/16"	3-5/8"	13"	420 g  / 15 oz	003107
  Japanese Dogyu Ryoguchi Genno Hammer ~ 20 oz	1-1/4" x 1-1/8"	3-3/4"	14-1/2"	560 g  / 20 oz	003114

   

  For California Residents:

  
  

  WARNING: Cancer & Reproductive Harm - www.P65Warnings.ca.gov

  
  

  WARNING: Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood