Seco-Larm EB-P101-20HQ Passive 4-in-1 HD Video Balun with 6” Pigtail, Pack of 10

4.3 (31 items)

Limited Time Sale

Until the end

New $74.25 (tax included) Number of stocks: 1

Used $37.13 (tax included) New Arrivals and Restocks Number in stock: 1

$37.12 cheaper than the new price!!

Free shipping for purchases over $99 ( Details )
Free cash-on-delivery fees for purchases over $99

See all stores

Please note that the sales price and tax displayed may differ between online and in-store. Also, the product may be out of stock in-store.

New $74.25

Management number	205063263	Release Date	2025/10/16	List Price	$37.13	Model Number	205063263
Category	Video Surveillance CCTV Accessories

4-in-1 TVI / CVI / AHD (up to 4K) and Analog video
Transmits up to 1,312ft (400m) depending on format, resolution, and cable used
PAL / NTSC / SECAM compatible
Built-in TVS surge protection
Anti-static and wave filters
Lightning protection – Grade III
60dB Crosstalk and noise immunity
Exceptional interference rejection
Real-time transmission over low-cost Cat5e/6 cable instead of costly coaxial cable
Quick-connect terminals for easy installation
Small size allows mounting of multiple baluns behind a DVR
Sold as Pair
Pack of 10

Specifications

Max. Range	TVI- 4MP: 590ft (180m) 4K: 426ft (130m), CVI- 4MP/4K: 656ft (200m), AHD- 4MP: 656ft (200m) 4K: 492ft (150m), Analog – 4MP/4K: 1,312ft (400m)
Common Mode Rejection	60dB, 15kHz~42MHz
Power	No external power required
Wire Type	UTP (Unshielded Twisted Pair) 24~16 AWG
Wire Category	Cat2~Cat6
Impedance	Coax, male BNC 75Ω@1MHz, Screwless terminal-100Ω@1MHz ±20Ω
Attenuation	1.5dB max.
Frequency response	DC~42MHz
Surge Protection	Renewable solid state surge protection
UTP Connection	Nickel plated
Video Format	NTSC, PAL, SECAM
Video Input	2KV (common mode), 10/700μs IEC6100-4-5/1955 (GB/T 1726, 5-1999)
Video Output	2KV (differential mode), 10/700μs IEC6100-4-5/1955 (GB/T 1726, 5-1999)
DC Loop resistance	52Ω/1000’ (18Ω/100m)
Differential Capacitance	19pF/ft max. (62pF/m max.)
Operating Humidity	0~95 % (Non-condensing)
Operating Temperature	-4°~158° F (-20°~70° C)
Storage Temperature	-40°~305° F (-40°~150° C)
Cable Length	5-15/16″ (150mm)
Case	ABS Plastic
Weight	1.4-oz (40g)
Dimensions	1-1/2″x3/4″x13/16″ (38x19x20 mm) [Housing only]

Troubleshooting

Wavy or ghost image if connected to image processor (e.g., multiplexer or DVR), but not if directly to monitor.	Move the Cat5e/6 cable away from possible sources of interference. Ensure that the same twisted pair connects to a balun at both ends of the cable. Replace the cable with a new Cat5e/6 cable.
Image background flutters between dark and light.	Remove a local power source, or adjust the monitor’s brightness and contrast.
Image is wavy and shakes.	Try reversing polarity of the two wires at one end of the Cat5e/6 cable
Image is weak or faded.	Reduce the Cat5e/6 cable length. Replace with a higher-grade cable. Cat5e cable meets the specifications in the manual. Cat6 cable allows longer range.
No image.	Double-check that the Cat5e/6 and BNC cables are connected properly. Run a continuity test on all wires in the cable. Check that the camera and monitor are powered up. Ensure that the polarity of the Cat5e/6 connections is correct.